Protective glasses for working with LEDLASHES

19.00 €

Protective glasses for working with the LED LASHES system.
About LED LASHES:
What is LED lash adhesive?

The adhesive cures in 0.5-1 seconds with the LED LASH SYSTEM DEVICE (i.e. a lamp with a special light spectrum). The light spectrum should be no less than 400 nm, otherwise the adhesive will perform poorly or not work at all, i.e. will not cure. A thin layer of adhesive ensures fast and maximum adhesion, wrapping around the natural lash, with an instantly cured result. Lashes will never stick together again because the adhesive cures on a different principle and does not stick to adjacent lashes. This makes work easier for lash artists. The adhesive has an extremely low odor and fume level (neither the client nor the lash artist can smell it), as it does not contain a high concentration of cyanoacrylates. This causes less eye irritation because the adhesive cures immediately, and adhesive fumes do not reactivate even after a shower or exposure to high heat. The adhesive can be removed with a special remover, in other words, an adhesive solvent.

What are the main features of this LED extension?

This application is safe for both client and lash artist because the adhesive no longer contains high concentrations of the potent, toxic allergen cyanoacrylate. It contains only a small amount with an alternative formula.
Clients and lash artists who previously experienced severe allergies can now enjoy this application.
The application takes slightly longer than standard sets (on average, adding +30/40 min for a professional lash artist compared to standard application).
Aftercare is the same as for standard lash extensions.
Retention is also extended (when the procedure is performed properly).
This extension method supports classic, volume, and mega volume techniques.
Depends on the client's preferences.
Also, this method is slightly more expensive than traditional lash extensions.
___
Adhesive APPLICATION:

Dip the extension lash in a thin layer and place it onto the natural lash, hold under LED light for 2-5s and wait for the adhesive to cure. Avoid contact with eyes or damaged skin.
The adhesive will not cure without a SPECIAL SPECTRUM LED LAMP.
____
https://www.youtube.com/watch?v=78sDoU3q_pU

Here you can learn more about the LED technique 🙂
___
IMPORTANT:
THIS ADHESIVE IS DESIGNED EXCLUSIVELY FOR LASH ARTISTS WHO HAVE COMPLETED LED EYELASH EXTENSION TRAINING AND ARE CERTIFIED IN THIS NEW INNOVATIVE METHOD.
ARTISTS WHO COMPLETED TRAINING OUTSIDE ANNY'S LASHES ACADEMY ASSUME FULL RESPONSIBILITY FOR THE APPLICATION, WORK SPECIFICS, AND ADHESIVE CONTRAINDICATIONS FOR CLIENTS.
ALSO, WHEN WORKING WITH OTHER BRANDS' LED LAMPS INSTEAD OF CERTIFIED ANNY'S LASHES ACADEMY LAMPS, ARTISTS MUST KNOW THE LIGHT SPECTRUM
WAVELENGTHS AND UNDERSTAND THEIR CURING CAPABILITIES (EACH LAMP CURES DIFFERENTLY).
A PATCH TEST ON THE CLIENT IS MANDATORY BEFORE STARTING THE PROCEDURE WITH THIS ADHESIVE.
____
IF YOU HAVE ANY QUESTIONS,
WE WELCOME YOUR INQUIRIES AT:
karaliskasgrozis@gmail.com

Out of stock

Additional information

Length

MIX (8-12)

Curl

CC, D

Thickness

0.07mm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.